File: //usr/share/doc/jed/examples/jed.rc
% User Initialization file for the JED editor -*- slang -*-
% If a user does not have a startup file in the user's home directory,
% JED will automatically load this from JED_ROOT/lib. Thus it is easier
% for a system manager to make defaults for all users.
% Do not edit this file directly. Instead, copy it to your home
% directory (sys$login:jed.rc on VMS or $HOME/.jedrc on Unix) and edit
% the resulting file.
% To uncomment a line, simply remove any leading '%' characters.
% This file is divided into various sections. The first section pertains
% to keybindings (e.g., Wordstar, Emacs, EDT, etc...) and the following
% sections pertain to user preferences such as default TAB sizes, line
% and column numbers on status line, colors, indentation style, etc...
if (BATCH == 0)
{
%----------------------------------------------------------------------
% Keybindings (not loaded for batch processes)
%
% Default bindings are Emacs-like with EDT emulation on Unix and VMS.
% For the PC, only Emacs is enabled by default. If you do not want EDT
% bindings, simply coment out the appropriate line.
%
% For Wordstar like bindings, comment out EDT and Emacs lines and
% uncomment Wordstar line. A similar statement applies for BRIEF,
% and for Borland IDE-like bindings.
%
% () = evalfile("emacs"); % Emacs-like bindings
% () = evalfile("edt"); % EDT emulation
% () = evalfile ("ide"); % Borland IDE (see also doc/ide-mode.txt)
% () = evalfile ("brief"); % Brief Keybindings (MSDOS only!!)
% () = evalfile("wordstar"); % obsolete --- use ide instead)
% () = evalfile ("cua"); % CUA-like key bindings
% Some of the above emulations may set keys that conflict with access to
% the menubars. For example, emacs uses ESC-f to move by words. The
% next line causes the keys to activate the menus. Comment this out
% to preserve the emulation.
enable_menu_keys ();
% If you use jed inside an XTerminal, you can use the mouse to access the
% menus and move the cursor by uncommenting the next line:
% enable_xmouse ();
% What should the Ctrl-H key do??
%
% setkey ("bol", "^H"); % causes ^H to go to beg of line (EDT)
% setkey ("help_prefix", "^H"); % Uncomment to have Ctrl-H as help
#ifdef XWINDOWS
% See xjed.txt for information regarding the delete key under X Windows.
% x_set_keysym (0xFFFF, 0, "\e[3~");
% setkey ("delete_char_cmd", "\e[3~");
#endif
% !!!! ^S/^Q flow control problems !!!!
% if you experience problems with JED suddenly going into search mode
% for some reason then you are a victim of the emacs emulation's
% binding of the ^S key to the search function.
% TO prevent this from happening, either find out how to
% prevent unwanted ^S/^Q characters or uncomment the next line:
#ifdef UNIX
%enable_flow_control (1);
#endif
%----------------------------------------------------------------------
% Initial help screen --- comment out to disable.
% Note that for the help to be valid, it must occur AFTER bindings are
% loaded.
% help(); % Pops up a help window
} %Batch
%%%%%%%%%%%%%%%% top menu bar %%%%%%%%%%%%%%%
% To disable it, uncomment the next line. Note that menus will still be
% available but the menubar will be hidden when not in use.
% enable_top_status_line (0);
%---------------------------------------------------------------------------
% User Information (used by some modes, automatically determined on Unix)
%---------------------------------------------------------------------------
% set_realname ("John Doe");
% set_username ("jd");
% set_hostname ("no.where.com");
% set_emailaddress ("jd@no.where.com");
%----------------------------------------------------------------------
% JED global variables --- defaults shown
%
#ifdef VMS UNIX
%USE_ANSI_COLORS = 1; % if non-zero, JED will display colors on a color
% terminal (Unix and VMS only) See doc/color.txt
% for more discussion and look below for setting
% the colors.
#endif
No_Backups = 0; % If non-zero, backup files will not be created.
Startup_With_File = 1; % if greater then zero, force JED to prompt for a file
% if none is specified on the command line. If
% negative, inhibit startup message.
DISPLAY_TIME = 1; % non-zero enables the time to be displayed on
% status line, zero disables it. If this value
% is -1, 24 hour time will be used.
HIGHLIGHT = 1; % non-zero for region highlighting
WANT_SYNTAX_HIGHLIGHT = 1;
% Highlight syntax in C, Fortran, and TeX modes.
% See section on colors
% below for choosing how to highlight. On Unix and
% VMS systems, USE_ANSI_COLORS must also be non-zero.
HORIZONTAL_PAN = 20; % if zero, no automatic panning. If positive, only
% the current line is panned. If negative, pan window.
#ifdef IBMPC_SYSTEM
HORIZONTAL_PAN = -1; % For msdos, panning window might be better:
#endif
#ifdef IBMPC_SYSTEM
LINENUMBERS = 2; % A value of zero means do NOT display line number on
#else % status line line. A value of 1, means to display
LINENUMBERS = 1; % the linenumber. A value greater than 1 will also
#endif % display column number information. I recommend a
% value of 2 only at high baud rates
BLINK = 1; % if non zero, blink matching parenthesis
TAB_DEFAULT = 8; % Tab size (also try edit_tab_stops)
USE_TABS = 1; % Use tabs when generating whitespace.
Tab_Always_Inserts_Tab = 0; % Set this to 1 if you want the tab key to insert
% tabs.
WRAP_DEFAULT = 72; % wrap column
ADD_NEWLINE = 1; % add newline to file when writing if one not present
IGNORE_BEEP = 3; % Beep terminal during error messages---
% 1 == sound only, 2 = visible bell only, 3 = both
_traceback = 0; % Non zero means dump traceback on S-Lang errors
WRAP_INDENTS = 0; % Non zero indents next line after wrapping current.
% Make this a 1 if you want indented text mode.
%KILL_LINE_FEATURE = 0;
% If non-zero, kill line will kill through end of the
% line if Point is at the beginning of the line. For
% emacs-like behavior, set this to zero.
%---------------------------------------------------------------------------
% C-mode indentation style
%---------------------------------------------------------------------------
c_set_style ("jed"); % or "linux", "gnu", "bsd", "k&r"
#ifdef IBMPC_SYSTEM
% If non-zero, treat file names as case sensitive
Case_Sensitive_Filenames = 0;
#endif
%---------------------------------------------------------------------------
#ifdef MSDOS XWINDOWS MSWINDOWS
% Alt-key handling. Setting this variable controls how the
% Alt key is handled. By default it is set to 27 (Ascii ESCAPE). This means
% that any key pressed in conjunction with the alt key produces ESCAPE
% followed by the key itself. If ALT-X is pressed, an ESCAPE-X is generated.
% Set it to zero to turn off Alt key processing. On XWindow systems, setting
% this to zero will cause the high bit to be set on the character.
%ALT_CHAR = 27;
#endif
% Mute (dead or accent) keys
% Valid Mute keys are:
% ^, ~, ', `, \d168 (ISO Diaeresis), \d180 (ISO Acute), and \".
% This means pressing this key then the key you want to accent yields
% the accented character. If you do not know what this is, you do not
% need them. By default, they are turned off.
%mute_set_mute_keys (" ^ ~ ' ` \d168 \d180 \" "); % choose all or subset
META_CHAR = -1; % All chars with hi bit set will self insert
#ifdef IBMPC_SYSTEM
% DISPLAY_EIGHT_BIT = 128;
#else
% DISPLAY_EIGHT_BIT = 160; % Other systems assume ISO Latin 1
#endif
% Color Settings
% Look at jed/lib/colors/README for a description of predefined color
% schemes.
%set_color_scheme ("black3");
%set_color_scheme ("blue2");
#ifdef UNIX
%
% Terminal type. By default, on Unix termcap is used. However, some
% (if not all) termcaps do not include AL, DL strings for vtxxx terminals.
%
% True blue vt100 terminals cannot insert and delete lines so the AL and DL
% termcap entries are not appropriate for them. However, almost no one
% uses a true vt100 terminal anymore but they set their TERM variable to
% vt100 just the same. If you do not like the way your terminal scrolls,
% and it is more than a vt100, either set your TERM variable appropriately
% or add vt100 to the list below.
%
if (0)
{
$1 = "vt102 vt200 vt220 vt300 vt320 vt420 xterms";
if (is_substr($1, getenv("TERM"))) set_term_vtxxx(0);
}
#endif
% Compiler interface --- uncomment one of the following:
%
% variable Compile_Default_Compiler = "gcc"; % GNU compiler
% variable Compile_Default_Compiler = "Ultrix_cc"; % cc on Ultrix
% variable Compile_Default_Compiler = "bcc"; % Borlands BCC
% variable Compile_Default_Compiler = "sun_acc"; % SunOS C++ and ACC
% variable Compile_Default_Compiler = "hp_cc"; % HPUX cc
#ifdef WIN32
variable W32shell_Perform_Globbing = 0;
#endif
%
% Hooks: read jed/doc/hooks.sl for more information
%
define global_mode_hook (hook_name)
{
% if (hook_name != "c_mode_hook")
% local_setkey ("self_insert_cmd", "\t");
}
define dired_hook ()
{
%local_unsetkey ("^K");
%local_setkey ("dired_kill_line", "^K");
}